Banking on our hi-tech manufacturing facilities, we are affianced in providing our clients superior quality Gang Mover. This mover is manufactured with high precision to meet the set market standards under the guidance of our deft professionals with the utilization of optimum grade components and ultra-modern technology. Fitted with bearing, this mover improves cutting and trimming efficiency of grass with no hassle. We offer this Gang Mover in different technical specifications as per the demands of our clients at affordable rates.
Easy to carry
Longer service life
The ganging frames have a common unit frame- The Framework is so designed that there are no upward projections, thus enabling the mowers to run under low hanging trees etc. and cut grass will not adhere to choke the mowers.
Chassis: Unbreakable, Reinforced steel, Firmly braced by axle and bottom block assembly
Transmission: The cylinder is driven at both ends from road wheels through hardened steel machined cut gears, totally enclosed in OIL BATH and ratchet drive to facilitate turning. Clutches fitted enables the cylinder to be taken out of gear and helps in transportation
Gear Drive Type: All gears are fitted with bearing for longer life
Cutting Cylinder: Blades running on heavy duty ball bearings
Cutting Ratio: 1. at 08Kph 1.0 Acre per hour / unit 2. At 08Kph 3.0 Acres per hour / 3 unit 3. At 10Kph 1.4 Acres per hour/ unit 4. At 10Kph 4.2 Acres per hour/3 unit. 5. At 16Kph 2.0 Acres per hour / unit 6. At 16Kph 6.0 Acres per hour / 3 unit
Cutting Width: 1. 1 unit - 76 cm (2ft 6in) 2. 3 unit-2.10m ( 7ft 0in )
Overall Width: 5. 1 unit -1 22m (4ft 0in) 6. 3 unit-2.59m ( 8ft 6in)
Overall Length: 1. 1 unit - 81 cm (2ft 8in) 2. 3 unit-2.59m ( 8ft 6in)
Clutch: A Clutch is fitted to each gearbox to engage the drive to the cutting cylinder Carriages: Unbreakable
Adjustment: Cutting height can be adjusted from 1/2 to 8 Inches
Rear-Roll: Running on bearings on both sides
Wheels (classic): Pressed steel studded wheels Specially fitted with double ball bearings.
Paint: Powder coated / Liquid Painted
Cutting Speed Recommended: Depending upon the ground conditions, between 8-16 Kmph where conditions are not so good it is recommended to reduce the speed to 5-8 Kmph. These are widely used for cutting large areas as public parks, playing fields and golf grounds.
B-21, DSIDC Industrial Complex, Rohtak Road, Nangloi, New Delhi, Delhi, 110041, India